Publications

Journal/Transaction Papers:

1. R. Gong, S. H. Huang, and T. Chen, "Robust and Efficient Rule Extraction Through Data Summarization and Its Application in Welding Fault Diagnosis," IEEE Transactions on Industrial Informatics, Vol. 4, No. 3, 2008, pp. 198-208.

2. K. M. N. Muthiah and S. H. Huang, "Overall Cycle-time Effectiveness (OCE) Metric for System-Level Service Performance Measurement and Bottleneck Detection," International Journal of Industrial and Systems Engineering, Vol. 3, No. 5, 2008, pp. 594-609.

3. S. Dwivedi, S. H. Huang, J. Shi, and W. H. VerDuin, "Yield Prediction for Seamless Tubing Processes: A Computational Intelligence Approach," International Journal of Advanced Manufacturing Technology, Vol. 37, No. 3/4, 2008, pp. 314-322.

4. K. M. N. Muthiah, S. Mahadevan, and S. H. Huang, "Automating Factory Performance Diagnostics Using Overall Throughput Effectiveness (OEE) Metrics" International Journal of Advanced Manufacturing Technology, Vol. 36, No. 7/8, 2008, pp. 811-824.

5. R. Kothamasu and S. H. Huang, “Adaptive Mamdani Fuzzy Model for Condition-based Maintenance,” Fuzzy Sets and Systems, Vol. 158, N. 24, 2007, pp 2715-2733.

6. K. M. N. Muthiah and S. H. Huang, "Overall Throughput Effectiveness (OTE) Metrics for Factory Level Performance Monitoring and Bottleneck Detection," International Journal of Production Research, Vol. 45, No. 20, 2007, pp. 4753-4769.

7. K. Hu and S. H. Huang, "Solving Inverse Problems Using Particle Swarm Optimization: An Application to Aircraft Fuel Measurement Considering Sensor Failures," Intelligent Data Analysis, Vol. 11, No. 4, 2007, pp. 421-434.

8. N. Xu and S. H. Huang, "Automatic Setup Planning: Current State-of-the-Art and Future Perspective," International Journal of Manufacturing Technology and Management,” Vol. 11, No. 2, 2007, pp. 193-208.

9. S. H. Huang, R. Kothamasu, and N. Rapur, "Iterative Imputation Algorithms for Modeling With Incomplete Data," Intelligent Data Analysis, Vol. 11, No. 2, 2007, pp. 189-202.

10. S. Yao, X. Han, Y. Yang, Y. K. Rong, S. H. Huang, D. W. Yen, G. Zhang, “Computer-Aided Manufacturing Planning for Mass Customization: Part 1, Framework,” International Journal of Advanced Manufacturing Technology, Vol. 32, No. 1/2, 2007, pp. 194-204.

11. S. Yao, X. Han, Y. Yang, Y. K. Rong, S. H. Huang, D. W. Yen, G. Zhang, “Computer-Aided Manufacturing Planning for Mass Customization: Part 2, Automated Setup Planning,” International Journal of Advanced Manufacturing Technology, Vol. 32, No. 1/2, 2007, pp. 205-217.

12. S. Yao, X. Han, Y. Yang, Y. K. Rong, S. H. Huang, D. W. Yen, G. Zhang, “Computer-Aided Manufacturing Planning for Mass Customization: Part 3, Information Modeling,” International Journal of Advanced Manufacturing Technology, Vol. 32, No. 1/2, 2007, pp. 218-228.

13. S. H. Huang and H. Keskar, "Comprehensive and Configurable Metrics for Supplier Selection," International Journal of Production Economics, Vol. 105, No. 2, 2007, pp. 510-523.

14. K. M. N. Muthiah and S. H. Huang, "A Review of Literature on Manufacturing Productivity Measurement and Improvement," International Journal of Industrial and Systems Engineering, Vol. 1, No. 4, 2006, pp. 461-484.

15. N. Xu and S. H. Huang, “Multiple-Attribute Utility Analysis in Setup Plan Evaluation,” ASME Journal of Manufacturing Science and Engineering, Vol. 128, No. 1, 2006, pp. 220-227.

16. M. Vonderembse, M. Uppal, S. H., Huang, G. Wang, and J. P. Dismukes, “Designing Supply Chains: Towards Theory Development,” International Journal of Production Economics, Vol. 100, No. 2, 2006, pp. 223-238.

17. R. Kothamasu, S. H. Huang, and W. H. VerDuin, “System Health Monitoring and Prognostics – A Review of Current Paradigm and Practices,” International Journal of Advanced Manufacturing Technology, Vol. 28, No. 9, 2006, pp. 1012-1024.

18. A. Lin and S. H. Huang, “A Continuous Sampling Approach to Pharmacy Operation Efficiency Study,” International Journal of Industrial and Systems Engineering, Vol. 1, No. 1/2, 2006, pp. 263-283.

19. T.-C. Kuo, S.-H. Chang, and S. H. Huang, “Environmentally Conscious Design Using Fuzzy Multi-Attribute Decision-Making,” International Journal of Advanced Manufacturing Technology, Vol. 29, No. 3-4, 2006, pp. 209-215.

20. R. Kothamasu, S. H. Huang, and W. H. VerDuin, “A Comparison of Computational Intelligence and Statistical Methods in Condition Monitoring for Hard Turning,” International Journal of Production Research, Vol. 43, No. 3, 2005, pp. 597-610.

21. S. H. Huang, S. Sheoran, and H. Keskar, “Computer-Assisted Supply Chain Configuration Based on Supply Chain Operation Reference (SCOR) Model,” Computers & Industrial Engineering, Vol. 48, No. 2, 2005, pp. 377-394.

22. G. Wang, S. H. Huang, and J. P. Dimsukes, “Manufacturing Supply Chain Design and Evaluation,” International Journal of Advanced Manufacturing Technology, Vol. 25, No. 1/2, 2005, pp. 93-100.

23. R. Kothamasu, J. Shi, S. H. Huang, and H. R. Leep, “Evaluation of Model Selection Criteria in Maintenance Applications,” Structural Health Monitoring: An International Journal, Vol.3, No. 3, 2004, pp. 213-224.

24. S. H. Huang, Q. Liu, and R. Musa, “Tolerance-based Process Plan Evaluation Using Monte Carlo Simulation,” International Journal of Production Research, Vol. 42, No. 23, pp. 2004, pp. 4871-4891.

25. S. H. Huang, S. K. Sheoran, and G. Wang, “A Review and Analysis of Supply Chain Operation Reference (SCOR) Model,” Supply Chain Management: An International Journal, Vol. 9, No. 1, 2004, pp. 23-29.

26. G. Wang, S. H. Huang, and J. P. Dismukes, “Product Driven Supply Chain Selection Using Integrated Multi-Criteria Decision Making Methodology,” International Journal of Production Economics, Vol. 91, No. 1, 2004, pp. 1-15.

27. R. Musa, B. C. Shultes, and S. H. Huang, “Simulation-Based Manufacturing Error Synthesis: Input Analysis and Validation,” Transactions of the North American Manufacturing Research Institution/SME, Vol. 32, 2004, pp. 311-318.

28. R. Musa, S. H. Huang, and Y. K. Rong, “Simulation-Based Tolerance Stackup Analysis in Machining,” Transactions of the North American Manufacturing Research Institution/SME, Vol. 32, 2004, pp. 533-540.

29. C. Shoaf, A. Genaidy, W. Karwowski, S. H. Huang, “Improving Performance and Quality of Working Life: A Model for Organizational Health Assessment in Emerging Enterprises,” Human Factors and Ergonomics in Manufacturing, Vol. 14, No. 1, 2004, pp. 81-95.

30. S. H. Huang and N. Xu, “Automatic Setup Planning for Metal Cutting: An Integrated Approach,” International Journal of Production Research, Vol. 41, No. 18, 2003, pp. 4339-4356.

31. S. H. Huang, “Dimensionality Reduction in Automatic Knowledge Acquisition,” IEEE Transactions on Knowledge and Data Engineering, Vol. 15, No. 6, 2003, pp. 1364-1373.

32. H. Xing, S. H. Huang, and J. Shi, “Rapid Development of Knowledge-based System Via Integrated Knowledge Acquisition,” Artificial Intelligence for Engineering Design, Analysis and Manufacturing, Vol. 17, No. 3, 2003, pp. 221-234.

33. S. H. Huang, R. Kothamasu, Y. C. Shiralkar, and D. Bogstad, “Prediction of Plastic Preform Temperature Profile and Modeling Perspective,” International Journal of Manufacturing Science and Technology, Vol. 4, No. 2, 2003, pp. 56-83.

34. A. Jain, N. Xu, S. H. Huang, and Y. K. Rong, “Process Capability Analysis for Production Tolerance Assignment,” Transactions of the North American Manufacturing Research Institution/SME, Vol. 31, 2003, pp. 531-538.

35. S. H. Huang and Q. Liu, “Rigorous Application of Tolerance Analysis in Setup Planning,” International Journal of Advanced Manufacturing Technology, Vo. 21, No. 3, 2003, pp. 196-207.

36. S. H. Huang, J. P. Dimukes, J. Shi, Q. Su, M. A. Razzak, R. Bodhale, and D. E. Robinson, “Manufacturing Productivity Improvement Using Effectiveness Metrics and Simulation Analysis,” International Journal of Production Research, Vol. 41, No. 3, 2003, pp. 513-527.

37. S. H. Huang, J. P. Dimukes, J. Shi, Q. Su, G. Wang, M. A. Razzak, and D. E. Robinson, “Manufacturing System Modeling for Productivity Improvement,” Journal of Manufacturing Systems, Vol. 21, No. 4, 2002, pp. 249-259.

38. S. H. Huang and H. Xing, “Extract Intelligible and Concise Fuzzy Rules from Neural Networks,” Fuzzy Sets and Systems, Vol. 132, No. 2, 2002, pp. 233-243.

39. S. H. Huang, M. Uppal, and J. Shi, “A Product Driven Approach to Manufacturing Supply Chain Selection,” Supply Chain Management: An International Journal, Vol. 7, No. 3/4, 2002, pp. 189-199.

40. S. H. Huang, Y. K. Rong, and D. W. Yen, “Integrated Setup Planning and Fixture Design: Issues and Solutions,” Transactions of the North American Manufacturing Research Institution/SME, Vo. 30, 2002, pp 589-596.

41. S. H. Huang, Q. Su, N. Samant, and I. Khan, “Development of a Web-based Integrated Manufacturing Laboratory,” Computer Applications in Engineering Education, Vol. 9, No. 4, 2002, pp. 228-237.

42. F. Zhou, T.-C. Kuo, S. H. Huang, and H.-C. Zhang, “Form Feature and Tolerance Transfer from a 3D Model to a Setup Planning System,” International Journal of Advanced Manufacturing Technology, Vol. 19, No. 2, 2002, pp. 88-96.

43. T. C. Kuo, H. C. Zhang, and S. H. Huang, “Design for Manufacture and Design for “X”: Concepts, Applications, and Perspectives,” Computers & Industrial Engineering, Vol. 41, No. 3, 2001, pp. 241-260.

44. S. H. Huang, H. Xing, and M. Benjamin, “Automated Knowledge Acquisition for Design and Manufacturing: The Case of Micromachined Atomizer,” Journal of Intelligent Manufacturing, Vol. 12, No. 4, 2001, pp. 377-391.

45. S. H. Huang, H. Xing, and G. Wang, “Intelligent Classification of Drop Hammer Forming Process Method,” International Journal of Advanced Manufacturing Technology, Vol. 18, No. 2, 2001, pp. 89-97.

46. Q. Liu and S. H. Huang, “Prediction of Component Dimensional and Geometric Accuracy Through Manufacturing Error Analysis,” Transactions of the North American Manufacturing Research Institution/SME, Vol. 29, 2001, pp. 525-532.

47. S. H. Huang, K. Bhura, and G. Wang, “Cutter Path Simulation and Product Visualization Using AutoCAD,” Computer Applications in Engineering Education, Vol. 8, No. 2, 2000, pp. 113-126.

48. Q. Liu and S. H. Huang, “Geometric Tolerance Normalization and Its Application,” Transactions of the North American Manufacturing Research Institution/SME, Vol. 28, 2000, pp. 305-310.

49. T.-C. Kuo, H.-C. Zhang, and S. H. Huang, “Disassembly Analysis for Electromechanical Products: A Graph-based Heuristic Approach,” International Journal of Production Research, Vol. 38, No. 5, 2000, pp. 993-1007.

50. S. H. Huang, “Automated Setup Planning for Lathe Machining,” Journal of Manufacturing Systems, Vol. 17, No. 3, 1998, pp. 196-208.

51. H.-C. Zhang, T.-C. Kuo, H. Lu, S. H. Huang, “Environmentally Conscious Design and Manufacturing: A State-of-the-Art Survey,” Journal of Manufacturing Systems, Vol. 16, No. 5, 1997, pp. 352-371.

52. S. H. Huang and M. R. Endsley, “Providing Understanding of the Behavior of Feedforward Neural Networks,” IEEE Transactions on Systems, Man, and Cybernetics, Vol. 27, No. 3, 1997, pp. 465-474.

53. S. H. Huang, H.-C. Zhang, W. J. B. Oldham, “Tolerance Analysis for Setup Planning: A Graph Theoretical Approach,” International Journal of Production Research, Vol. 35, No. 4, 1997, pp. 1107-1124.

54. S. H. Huang and H.-C. Zhang, “Tolerance Analysis in Setup Planning for Rotational Parts,” Journal of Manufacturing Systems, Vol. 15, No. 5, 1996, pp. 340-350.

55. S. H. Huang and H.-C. Zhang, “Use of Tolerance Chart for NC Machining,” Journal of Engineering Design and Automation, Vol. 2, No. 1, 1996, pp. 91-104.

56. H.-C. Zhang, S. H. Huang, and J. Mei, “Operational Dimensioning and Tolerancing in Process Planning: Setup Planning,” International Journal of Production Research, Vol. 34, No. 7, 1996, pp. 1841-1858.

57. S. H. Huang, H.-C. Zhang, S. Sun, and H. Li, “Function Approximation and Neural-Fuzzy Approach to Machining Process Selection,” IEEE Transactions on Components, Packaging, and Manufacturing Technology - Part C: Manufacturing, Vol. 19, No. 1, 1996, pp. 9-18.

58. S. H. Huang, H.-C. Zhang, and M. L. Smith, “A Progressive Approach for the Integration of Process Planning and Scheduling,” IIE Transactions, Vol. 27, 1995, pp. 456-464.

59. S. H. Huang and H.-C. Zhang, “Neural-Expert Hybrid Approach for Intelligent Manufacturing: A Survey,” Computers in Industry, Vol. 26, No. 2, 1995, pp. 107-126.

60. H.-C. Zhang and S. H. Huang, “Applications of Neural Networks in Manufacturing: A State-of-the-Art Survey,” International Journal of Production Research, Vol. 33, No. 3, 1995, pp. 705-728.

61. H.-C. Zhang and S. H. Huang, “A Fuzzy Approach for Process Plan Selection,” International Journal of Production Research, Vol. 32, No. 6, 1994, pp. 1265-1279.

62. S. H. Huang and H.-C. Zhang, “Artificial Neural Networks in Manufacturing: Concepts, Applications, and Perspectives,” IEEE Transactions on Components, Packaging, and Manufacturing Technology - Part I, Vol. 17, No. 2, 1994, pp. 212-228.

Books and Book Chapters:

1. Y. Rong, S. H. Huang, and Z. Hou, Advanced Computer-Aided Fixture Design, San Diego, CA: Elsevier, 2005.

2. S. H. Huang and H.-C. Zhang, "Tolerance Analysis for Setup Planning in CAPP," in Advanced Tolerancing Techniques, New York, NY: John Wiley & Sons, 1997, pp. 427-460.

Conference Papers:

1. R. Gong, T. Chen, and S. H. Huang, “A Fuzzy Rule Extraction Method for Welding Fault Diagnosis,” 4th International Symposium on Management, Engineering, and Informatics, Orlando, Fl, June 29-July 2, 2008.

2. T. Chen and S. H. Huang, “Tree Parity Machine-based One-time Password Authentication Schemes,” 2008 International Joint Conference on Neural Networks, Hong Kong, June 1-6, 2008.

3. S. Atluru, A. Deshpande, S. H. huang, and J. P. Snyder, “Smart Machine Supervisory System: Concept, Definition, and Application,” 62nd Meeting of the Society for Machinery Failure Prevention Technology, Virginia Beach, Va, May 6-8, 2008.

4. S. H. Huang, L. R. Wulsin, H. Li, and D. Mo, “A Moving Window Method for Direct Dependency Test,” NSF CMMI Engineering Research and Innovation Conference 2008, Knoxville, TN, January 7-10, 2008.

5. N. Xu, S. H. Huang, and L. R. Wulsin, “Dependency Test for Dimensionality Reduction in Healthcare Data Analysis,” IIE Annual Conference and Expo 2007, May 19-23, Nashville, TN, 2007.

6. A. C. Lin, S. H. Huang, J. J. Qian, Y. Chen, X. Ma, "The Effects of Automated Prescription Filling System On the Improvement of Pharmacy Staff in Prescription Filling Activities," ISPOR 2nd Asia-Pacific Conference, March 5-7, Shanghai, China, 2006.

7. L. R. Wulsin, K. Hu, S. H. Huang, and J. Welge, "Depression and Cardiovascular Morbidity in the Medicare Health Outcome Study," American Psychosomatic Society 64th Annual Scientific Meeting, March 1-4, Denver, Colorado, 2006.

8. N. Xu, S. H. Huang, and J. Snyder, “Systematic Investigation of Tool Wear Monitoring in Turning Operations,” 2005 ASME International Mechanical Engineering Congress and Exposition, November 5-11, Orlando, FL, 2005.

9. A. Z. Zeng, K. Rong, and S. H. Huang, “A Hub-based Supplier Alliance of Small Manufacturing Enterprises in Collaborative Manufacturing,” IEEE International Conference on Service Operations and Logistics, and Informatics, August 10-12, Beijing, P. R. China, 2005.

10. R. Kothamasu, J. Shi, and S. H. Huang, “Human Centered Neuro-Fuzzy Modeling,” The 8th World Multi-Conference on Systemics, Cybernetics, and Informatics, July 18-21, Orlando, FL, 2004.

11. M. Vonderembse, S. H. Huang, and J. P. Dismukes, “Designing Supply Chains: Towards Theory Development,” 2004 Western Decision Sciences Annual Meeting, Manzanillo, Mexico April 13-17, 2004.

12. Y. Rong, X. Han, W. Hu, H. Song, and S. H. Huang, “Integrated Fixture Design in Manufacturing Planning,” 2004 NSF Design and Manufacturing Grantees Conference, Dallas, TX, January 6-9, 2004.

13. R. Kothamasu, S. H. Huang, and W. H. VerDuin, “Analysis of Performance Evaluation Metrics to Combat the Model Selection Problem,” NIST Workshop on Performance Metrics for Intelligent Systems, Gaithersburg, MD, September 16-18, 2003.

14. Y. Shiralkar, L. K. Miller, J. P. Dismukes, S. H. Huang, and G. C. Daley, "Stage-Gate Modeling and Metrics for Software Commercialization," 2003 Portland International Conference on Management of Engineering Technology, Portland, OR, July 20-24, 2003.

15. J. P. Dismukes, L. K. Miller, Y. Shiralkar, R. Miller, S. H. Huang, and V. A. Ames, “Technological Innovation By Design: An Information Enhanced Methodology For Accelerated Innovation,” 2003 Portland International Conference on Management of Engineering Technology, Portland, OR, July 20-24, 2003.

16. S. Yao, X. Han, Y. Rong, S. H. Huang, D. W. Yen, and G. Zhang, “Feature-based Computer-aided Manufacturing Planning for Mass Customization of Non-rotational Parts,” 2003 ASME Computers and Information in Engineering Conference, Chicago, IL, September 2-3, 2003.

17. R. Musa and S. H. Huang, “3D Tolerance Stack-up Analysis,” 2003 Industrial Engineering Research Conference, Portland, OR, May 18-20, 2003.

18. Y. K. Rong and S. H. Huang, “Feature-based Computer Aided Manufacturing Planning for Mass Customization,” 2003 NSF Design and Manufacturing Grantees Conference, Tuscaloosa, Alabama, January 6-9, 2003.

19. 15. S. H. Huang, J. Shi, S. Maloo, and E. Steinthorsson, “Automatic Generation of Quadrilateral Multi-Block Topology for FEA/CFD Applications,” 2002 IEEE International Conference on Industrial Technology, Bangkok, Thailand, December 11-14, 2002.

20. R. Kothamasu, S. H. Huang, and I. Marinescu, “Intelligent Tool Wear Estimation for Hard Turning: Neural-Fuzzy Modeling and Model Evaluation,” 2002 International CIRP Design Seminar, Hong Kong, May 16-18, 2002.

21. I. Marinescu, R. Felix, R. Kothamasu, S. H. Huang, “Prediction of 3-D Surface Texture Using Neuro-Fuzzy Techniques,” 2002 International CIRP Design Seminar, Hong Kong, May 16-18, 2002.

22. Y. Rong, S. H. Huang, and D. Yen, “Integrated Setup Planning and Fixture Design,” 2002 NSF Design and Manufacturing Grantees Conference, San Juan, January 2002.

23. J. P. Dismukes and S. H. Huang, “Measurement and Improvement of Factory Level Productivity,” 2002 NSF Design and Manufacturing Grantees Conference, San Juan, January 2002.

24. S. H. Huang, R. Kothamasu, and H. Xing, “Automatic Generation of Pragmatic and Intelligible Fuzzy Rules,” IEEE Systems, Man and Cybernetics 2001, Tuscon, AZ, October 8-10, 2001.

25. Q. Liu and S. H. Huang, “Structured Process Plan Information Modeling for Tolerance Prediction,” the 5th International Conference on Engineering Design and Automation, Las Vegas, NV, August 5-8, 2001.

26. S. H. Huang, H. Xing, and R. Kothamasu, “An Integrated Approach to Manufacturing Knowledge Acquisition: With Application to Process Planning for Drop Hammer Forming,” IJCAI-01 Workshop on Artificial Intelligence and Manufacturing, Seattle, WA, August 5, 2001.

27. G. Wang, S. H. Huang, and J. P. Dismukes, “An Analytic Hierarchy Process Model-Based Framework for Supply Chain Design,” IERC 2001, Dallas, TX, May 20-22, 2001.

28. T.-C. Kuo, S. H. Chang, and S. H. Huang “Fuzzy Multi-Attribute Decision-Making in Green Manufacturing,” The 5th Annual International Conference on Industrial Engineering Theory, Applications, and Practice, paper # 278, 2000.

29. P. Svenmarck, S. H. Huang, and E. P. Blasch, “Transparent Neurofuzzy Models of Human Performance,” Proceedings of the Fifth Annual Conference on Human Interaction with Complex Systems (HICS), April 30-May 2, Beckman Institute, University of Illinois, 2000.

30. S. H. Huang, “Mathematical Formulation of Automated Setup Planning,” Japan-USA Symposium on Flexible Automation, July 23-26, 2000, Ann Arbor, MI.

31. G. Wang, J. P. Dismukes, S. H. Huang, and S. Chandrasekaran, “Manufacturing Productivity Assessment Using Overall Equipment Effectiveness (OEE),” Japan-USA Symposium on Flexible Automation, July 23-26, 2000, Ann Arbor, MI.

32. S. H. Huang and H. Xing, “Heuristic Manufacturing Knowledge Modeling: A Neural Network/Fuzzy Logic Hybrid Approach,” The 4th International Conference on Frontiers of Design and Manufacturing, pp. 80-90, June 16-19, 2000, Hangzhou, P. R. China.

33. S. H. Huang, G. Wang, and J. P. Dismukes, “A Manufacturing Perspective on Supply Chain Integration,” Proceedings of the 10th International Conference on Flexible Automation and Intelligent Manufacturing, Vol. 1, pp. 204-214, June 26-28, 2000, College Park, MD.

34. S. H. Huang and Q. Liu, “Geometric Tolerance Normalization and Its Application: The Case of Parallelism and Perpendicularity Tolerances,” Proceedings of the 10th International Conference on Flexible Automation and Intelligent Manufacturing, Vol. 1, pp. 173-182, June 26-28, 2000, College Park, MD.

35. S. H. Huang, “An Object-Oriented Approach for Manufacturing Knowledge Representation in CAD/CAM Systems: Initial Study,” CAICIM Conference, Rensselaer Polytechnic Institute, October 7-9, 1998, Troy, New York.

36. H. C. Zhang, T. C. Kuo, and S. H. Huang, “Recycling Model of End-of-Life Product,” Japan-USA Symposium on Flexible Automation, pp. 1127-1130, July 7-10, 1996, Boston, MA.

37. H. C. Zhang, F. Zhou, T. C. Kuo, and S. H. Huang, “Form Feature and Tolerance Transfer from a 3D Model to a Setup Planning System,” Proceedings of the 2nd World Conference on Integrated Design and Process Technology, pp. 358-368, 1996.

38. D. Zhang, S. H. Huang, and H.-C. Zhang, “Integrated Process Planning,” Proceedings of the 1995 NSF Design and Manufacturing Grantees Conference, pp. 163-164, January, 1995.

39. S. H. Huang and H.-C. Zhang, “On the Use of Knowledge-Based Connectionist Model in CAPP systems,” Manufacturing Science and Engineering, PED-Vol. 68-1, ASME, 1994, pp. 65-74.

40. S. H. Huang and H.-C. Zhang, “Neural Networks in Manufacturing,” Robotics and Manufacturing: Proceedings of the Fifth International Symposium on Robotics and Manufacturing, pp. 743-748, August, 1994

41. S. H. Huang, J. Mei, H.-C. Zhang, and S. R. Ray, “IPPS: An Integrated Process Planning Project,”, Technical Papers of the North American Manufacturing Research Institution of SME 1994, Dearborn, MI: SME, 1994, pp. 123-128.

42. J. Mei, S. H. Huang, and H.-C. Zhang, “Setup and Datum Selection in CAPP,” Proceedings of the 1994 NSF Design and Manufacturing Grantees Conference, National Science Foundation, pp. 185-186, 1994.

43. H.-C. Zhang, S. H. Huang, and J. Mei, “An Introduction to An Integrated and Intelligent Process Planning Model,” Manufacturing Science and Engineering, PED-Vol.64, ASME, 1993, pp. 291-298.

44. S. H. Huang and H.-C. Zhang, “Overview of Neural Networks in Manufacturing,” Proceedings of 1993 IEEE/CHMT International Electronics Manufacturing Technology Symposium, Santa Clara, CA, pp. 177-190, October, 1993.

45. S. H. Huang and H.-C. Zhang, "A Neural-Expert Hybrid Knowledge Acquisition Model for Process Planning," AUTOFACT'93 Conference Proceedings, November 8-11, 1993, Chicago, IL, pp.25-1 - 25-16.

46. S. H. Huang, J. Mei, and H.-C. Zhang, "An Integrated Model for Process Planning and Production Scheduling," NSF DMS Grantees Conference, Charlotte, NC, January, 1993.

Technical Contact: Dr. Samuel Huang, Associate Professor, Department of Mechanical, Industrial & Nuclear Engineering, University of Cincinnati, Cincinnati, OH 45221. Phone: (513) 556-1154, Fax: (513) 556-3390, E-mail: Sam.Huang@UC.edu.